Turning a loop in wire for Jewellery Making

with Sue Heaser

Making a neat loop in the end of a piece of wire has many uses in jewellery-making. Here is what you will need: wire - the easiest thickness for beginners to use is between 22 gauge (0.7mm thick) and 18 gauge (1.2mm thick), round nose pliers, wire cutters.

Step 1

Hold one end of the wire in your non-working hand and grasp the other end firmly with the round nosed pliers. For a small loop use the ends of the pliers, larger loops can be formed using the wider part of the jaws.

Step 2

Turn the pliers to make a loop in the wire, holding the rest of the wire firmly between finger and thumb.

Step 3

At the end of the turn, the wire should form a complete loop, almost touching itself again.

Step 4

Reposition the pliers, grasping the wire again at the beginning of the loop. Turn the pliers in the opposite direction to kink the wire at the base of the loop.

Step 5

The resulting loop is now centrally positioned on the wire.