Iron mordant for use to colour protein fibres (wool, hair and silks) with natural dyes.
Iron mordant links chemically with the fibre and creates attachment points which bond with the colourant from natural dyes creating light and wash fast colours. It alters the colour obtained from dye plants (depending on the plant used) darkening the colour, known as ‘saddening’, yellows towards orange, reds to brown and purples to black. We encourage experimentation and recommend careful record keeping to help reproduce colours in future dye sessions.
It helps to soak the wool in warm water and squeeze out excess before adding to the mordant bath. For every 250g of the dry wool or silk, use 2g of ferrous sulphate in 5 litres of water. Gradually heat the mordant bath to around 80°C for 30 minutes and allow to cool slowly. Remove the wool and squeeze to remove excess liquor.
After mordanting, the wool can be simmered with any of the natural dyes. It may help to place the dyestuff in a mesh bag before adding to the dyebath. Simmer for approximately 30 minutes and turn off the heat. Allow the wool to cool slowly in the dyebath before removing it. Gently rinse out excess dye in clean water.
Alternatively fibres which have been dyed using alum, copper, tin or chrome mordants can be saddened by soaking in a warm bath using the same quantities of fibre, to water and iron mordants.
Iron will begin to oxidise when it comes into contact with air, this alters the colour from green to rusty brown. This change of colour does not affect the performance of iron as a mordant.
Please note that our current batch of Iron Mordant is paler in colour than previous batches. This does not impact on the performance of the Iron.
There are hazards associated with the use of this product. Follow the advice on the label at all times.