Pad Exposure Unit; 260 x 210mm
A low-cost easily handled unit for stencil exposure using a soft pad for contact support. The built-in digital timer provides the exposure timing control.
Screen printing mesh is coated with a light sensitive emulsion using a scoop coater. When the emulsion is dry, place a positive print of the image on the screen, with the pad and frame above. After exposure the emulsion which is in contact with the blocked area will wash off the screen. The areas exposed to UV are cured and will block the print paste.
- Power: dual 110V/220V
- Lamp: 6 tubes of 8W, UV light
- Exposure timer: 5 seconds – 5 minutes
- Maximum exposure area: 260 x 210mm
- Machine dimensions: 300 x 290 x 75mm
- Weight: 5KG