Fibrecrafts Heat Transfer Paint Thickener, 125ml

Use with Fibrecrafts Heat Transfer paints to thicken the colours for printing or screen printing without loss of colour.

Method for printing with Transfer Paints:

1. Brush, print, stencil or spray the design onto smooth, non-absorbent paper and allow to dry.
2. Place the design with the paint side against the fabric, using several layers of newspaper as an underlay and a layer of clean paper on top to avoid ink transfer. Set iron between wool and cotton, (cotton setting for a cotton/synthetic mix) and iron for 1-2 minutes. Keep the iron still, since movement can blur the image.
3. The transfer is complete when the paper begins to yellow. For larger patterns, set one area at a time, with a cooling time between transfers.
4. Transfers can be used more than once, but each subsequent application will give a duller image with some colour change. Colours are intermixable, non-toxic, water based and wash fast, with a soft and flexible handle.