Louet Megado Loom 32 shaft Mechanical dobby, choose from 5 weaving widths
A 32 harness loom available in 40 cm, 70 cm, 90 cm, 110 cm and 130 cm weaving width.
The Louet Megado loom is made of lacquered ash hardwood with the most complex castle section pre assembled. Included are: 60 Dobby Bars with 1200 pegs, a large shelf, built-in raddle, a stainless steel reed 40-10 (metric), 900/1400/1600 Texsolv heddles (390 mm), lease and tie-up sticks and sixteen warp sticks.
Please call for dimensions and other measurements.
A dobby loom has a dobby mechanism, which is used to program the harness combinations for the weave pattern. Dobby is short for “draw boy” which refers to the weaver’s helper who was used to control the warp thread by pulling on draw threads. The dobby mechanism replaces the treadle/lam combination of the traditional floor looms. The performance of a multi-harness loom is vastly improved by using a dobby mechanism, as it overcomes the major problems associated with the use of a large number of treadles.
A dobby loom allows you to select the combination of harnesses for every shed opening you wish to make. The great advantage of a dobby loom is that it avoids the necessity and the labour involved in making multiple tie-ups to treadle positioned underneath a loom. An investment in a Louët Dobby ensures many years of comfortable and productive weaving.
The mechanical dobby is a program bar with pegs system. The numbered holes in the program bars correspond with harnesses of the loom. If you want a harness to be raised, you place a peg in the corresponding hole of the program bar. Your series of program bars can be as long as you like; however, if the number of program bars becomes very large, you may want to consider an electronic dobby. The electronic dobby will give you almost unlimited harness combinations using a computer and software from Fiberworks PCW, Patternland, Weavemaker, Weave It, WeavePoint or Pro Weave, which all work with the Louët electronic interface.
Megado looms feature a countermarch shed. This is accomplished by raising the back beam at the same time as the shafts are being raised. The beam movement also compensates for changes in warp tension as the shed is made. An innovative construction ensures the action of the well balanced pedal to be very light in operation. This main pedal and also the optional weaving bench are adjustable in height to accommodate the weaver’s physical requirements.
The Megado loom also has the Louët sprung breast beam, a unique warp tension control system, which allows the weaver to set and check the warp tension each time the warp is advanced.
These innovative design features give the Megado looms an indisputable advantage over other competitive products. No other multi- harness loom treadles as light and creates as large a shed, even with a very high tension on the warp.
These looms are made to order, please allow up to 22 weeks for delivery of these premium weaving looms. If you would like to discuss your requirements further, do not hesitate to call us on telephone 01483 565800.