Screens which are stretched with monofilament polyester mesh require degreasing before applying emulsions, fillers or films. The reason for this is that the surface of the thread is so smooth that minute traces of grease (even grease from your hands) will create problems with adhesion and cause premature breakdown of the stencil. The gel is non-corrosive, safe to handle and easy to use. Wet the screen printing mesh and using a soft-bristled washing-up brush loaded with the gel, lightly scrub both sides of the mesh. Leave for 2 minutes before rinse thoroughly and allow the screen to dry. Wear rubber gloves to protect hands. Choose from 900g or 5kg
Due to some of the Selectasine products being sensitive to frost, we advise storage under suitable conditions and at temperatures above 5°C